Control Manual

14
To set a watering day schedule for each program:
1. Turn the function dial to the
Watering Days position. The display
will show the current watering day schedule for the selected
program.
2. Select Program
A , B , C or D with the Program switch.
3. Set the watering day(s) for the program using one of the three
following procedures: Days of the Week, Odd Days/Even Days or
Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule
for each program.
Days of the Week
A. Press the NEXT button until the weekday abbreviations are
shown at the top of the display.
B. Press the ON button. SUN (Sunday) will begin flashing.
C. To select the day, press the ON button. To remove the day
from the schedule, press the
OFF button.
D. Press the NEXT button to select the next day.
E. Repeat steps C and D to set the remaining days of the week.
Odd Days or Even Days
A. Press the NEXT button until ODD DAYS or EVEN DAYS is
displayed.
B. Press the ON button to select the schedule.
Optional: To remove selected days of the week from the
Odd/Even watering schedule:
1. Press the NEXT button until the selected day begins
flashing.
2. Press the OFF button to exclude the day from the schedule.
(Press the
ON button to restore the day to the schedule.)
Day Interval
A. Press the NEXT button until the DAY INTERVAL option is
displayed.
B. Press the ON button to select this option.
C. Press the NEXT button. The display shows the current Day
Interval number (1–30).
Programming the Controller