User's Manual

5
Programming the SST
Every programming operation begins by pressing the MODE button.
A long press (>2 seconds) turns the controller o. A short press (<2
seconds) advances the controller through the dierent programming
functions in the order that follows.
Programming the Controller during active irrigation is not possible. Stop the irrigation
cycle rst (page 10).
When in Programming mode, the controller will revert to the Home screen after 15
seconds of inactivity.
AM/PM or 24-Hour
1. Press the Mode button for <2 seconds until the AM / PM / 24 and icon
shows.
2. Press the or buttons to select AM/PM or 24-hour mode.
3. Press the button once to set and advance to the next programming option.
e Mode Button