System Guide

The Notifications Tab

1. Select Enable Notifications option as preferred.

2. If applicable

, enter the

e-mail address(es) to receive Weather Station

reporting.

Note: The option Notifications sent to individual addresses specified

for each station, provided on the Notifications tab of the Setup window,

must be selected as shown below.

ote: All Information sent through notification e-mail can be reviewed on

the

History tab of the Information panel. The information panel is cleared

when the Sentinel WMS program is closed.

The Weather Monitor Settings Tab

The settings on this tab are used to specify the normal and accelerated polling

frequency rate of the Weather Station by the Sentinel WMS program.

The Weather Station continuously monitors specific data points calibrated for

various local weather and climate conditions. The Sentinel WMS polls the

weather station at two specified frequency rates to retrieve data for normal,

conditions and at a higher, more frequent rate, when monitored conditions

begin fluctuating.

1. Enter a Normal Polling Interval from 0 to 100 minutes.

Note: Entering 0, will set a 1-minute interval rate.

2. Enter an Accelerated Polling Interval from 0 to 100 minutes.

3. Choose Save to save the selections.