System Guide

Editing Multiple Slots

When several slots will have station assignments that share common parameters

and Run Time values, editing the slots simultaneously as a group can be a great

time-saving tool to build programs rapidly.

Use the following procedure to select and edit multiple Slots.

1. To begin, all slots to be edited must have a station number assignment.

Either assign station numbers individually, or choose the Station Search

toolbar button to open the Station Search window.

2. Using the Station Search features, select stations to be entered on the

Slots by either matching the station Description or Type to compile a list

of stations, or select the station numbers from the number chart using

standard multi-selection keyboard methods: shift-click to select a

consecutive number of stations or ctrl-click for random selections.

3. Once the desired group of stations is selected, choose the

Add to Program

button to transfer the selections to the Slots fields. The slots to be edited will

be highlighted in orange and the Slot Editor window will open.

Editing Station Information

Station database information can be conveniently changed and entered directly

within the Slot Editor and immediately reflected in the Zone Data window.

Note: When editing multiple stations simultaneously, changes made through

the Slot Editor are applied to all stations within the edit group.

1. To begin, select (highlight in orange) the Station number slot, or select

multiple slots to be edited simultaneously using the standard shift-click

and ctrl-click keyboard methods.

2. Choose

Add to Program button to populate the Slots fields. The Slot Editor

window will open automatically. Click on Hide/Show Information to expand

the Slot Editor window.

3. Enter the station information in the appropriate text boxes within the

Station Information area.

Note:

arying Values) will be displayed if stations in the slots being edited

have dissimilar station information. If you prefer the stations veing edited to

have the same station information, you can overright the V.V. entry with the

desired value and select the Save button.

In the example below, station run time entered is 10 minutes and Type

description “N Park Strip” has been added to stations 4, 5, 15 and 16.

4. Choose Apply Changes to copy the per-cycle run time and Save.