User's Manual

33
Map Stations (4 Fields to set: Station number, station type codes and parameters)
Each station can be mapped to, or associated with, hardware other than the Sentinel controller output board. is setting relates to
“Station Type” as set below.
e 2.42 Firmware Map Stations menu item is in the form of: SS -> AAA/BBB:CC (See programming chart below.)
Each station can be mapped to, or associated with, other hardware by way of the 8 numbers to the right of the arrow. e eld labeled SS is
the Sentinel station to be mapped (01-48). e rest of the elds depend on the station type programming.
Station Type Programming
LOCAL No mapping necessary, any values entered are ignored.
UNIVERSAL Set AAA = 000
Set BBB = unit code of map to universal eld unit
Set CC = map to universal output number
TORO-2WD (Toro Two-
Wire):
Set AAA/BBB = 0xx/xxx where x is the 5 digit decoder address
Set CC = decoder output number 01-04
WIRELESS and
WIRELESS-LR
Set AAA = board group
Set BBB = 00x where x is the switch position (board number)
Set CC = output number (1 - 12).
2 3 41
ENTER
- OR -
ENTER
- OR -