User's Manual

14
Use this menu to inform the controller the number of stations it has. e Sentinel controllers typically have station counts in 12-station incre-
ments (12, 24, 36, or 48).
Unit Code (1 Field to set)
Every controller must have a three digit code assigned to it. is is known as the controller’s address. It is possible to select any three digit code
from 000 to 999. is is the identier that is used when selecting an individual eld controller with the hand held radio or from the central
controller. If connecting via ethernet (and connecting more than one satellite), set unit codes between 1 and 255. Otherwise it is possible to
set unit codes up to 999.
IMPORTANT: e unit code is required for Central Control operations. Even if most of the satellite programming will be from the central software,
the Unit Code must be set.
2 3 41
ENTER
- OR -
ENTER
- OR -
2 3 41
ENTER
- OR -
ENTER
- OR -