User's Manual

Menu Setting Function

Station Settings • Plant Factor

• Stn Days O

• Maximum Flows

• Expected Flows

• Map Stations

• Station Type

• Precip Rate

• Assign a percentage factor to any zone for the type of plant material.

• Turn o individual stations for a specied number of days (up to 255).

• Set the maximum gallons per minute (GPM) for individual stations.

• Program the expected ow (GPM) for individual stations.

• Each station can be mapped, or associated with hardware other than the Sentinel control-

ler output board. is setting relates to “Station Type” .

• Select the station type per station:

LOCAL, UNIVRSAL, WIRELESS, TORO-2WD, BASELINE, or MC-48E.

• Set the precipitation rate (inches / hr) for each station.

Stop Menu • Full Shutdown

• All Manuals O

• All Autos O

• Shut down all stations immediately.

• Turn o all manually running stations.

• Turn o all programmed stations.

Satellite Settings • Time and Day

• ET

• Language

• Flow Processing

• Flow Factors Meter 2

• Flow Factors Meter 1

• N/O Master

• Station Count

• Unit Code

• Day Change Hour

• Set the time and day of the satellite.

• Set the maximum and default ET (evapotranspiration) levels.

• Specify the language the satellite uses: English, Spanish, or French.

• Set Flow Processing ON or OFF. Aids in resolving Flow issues.

• See Chapter 2 explanation for this command.

• Set the Master Circuit as normally closed or normally open.

• Specify the station count on the satellite, up to 204, in increments of 12.

• See Chapter 2 explanation for this command.

Help • To be determined