Owner's Manual

You can also start any programs as shown in the picture. When
you click on the Start option next to a program, (A2in the
example picture) the Semi Auto Start data entry box opens
where you can specify which slot to begin the cycle and whether
the Water Window is In or Out. This is known as a Semi Auto
Start. You can select any number of programs to start, then click
Send to transmit to the field unit. To stop a running program,
select the Stop option next to the Program, then click Send. Click
the Print Image button to print the program status window and
the Print Data button to print the information in tabular format.
The All Off command will simultaneously select Stop for every
program. You can then click Send to immediately shut off all
programs at once.
From the Master Control Panel, you can specify stations
within a field unit to shut off for a specified number of days.
Click the Stn Days Off button to display the Station Days
Off Status window. Simply enter the desired number of days
off in the text box next to the station number. Click the Send
command button to transmit the information to the field unit.
Click the Receive command button to verify which stations
are already off in the field unit.
Click on the Stn On Times command to display the Station
On Time Report. From this screen, click the Receive
command to read the current data from the field unit. The total
time in Hours and Minutes that each station operated since
the last Day Change time will be displayed.
These figures are not stored in the central database. That is
the reason why no Save command is provided in the window.
The data represents the actual values accumulated in the field unit which can change while a program is running.
The Program Run Times Report displays the total expected
run time for each of the field unit’s 16 programs during each
day of any chosen week of the current 6-week schedule
period. The actual run time can be received from the field unit
for comparison.
NOTE: Before using this report, you should Receive each
cluster of programs from the field unit in the Auto
Programming window, Schedule Programming window and
Special Data window. It is also advisable to Receive and
Send the Time / Date to synchronize the field unit with the
central computer. These steps will ensure agreement between
the field unit and the central computer database in case a
change in either component was forgotten.
Upon opening the Program Run Times Report window, you
should select the current Schedule Week and Day of the
schedules.
Program Run Times Report
Station On Times Report
Chapter 9 : Field Unit Reports
Station Days Off
Semi-Auto Start
9 - 19
Toro Sentinel Central Software User’s Guide