Design Guide
2
352’
Figure 2
(not to scale)
Determine the Number of Lights Needed and the Spacing
Directions Example
1. Use a measuring wheel to determine the length of the perimeter of the area to
be illuminated.
Perimeter measures 352’.
2. e lights should be roughly 15’ apart. Divide the perimeter by 15. Divide 352 by 15.
Equals 23.46.
3. Round that number UP to the nearest whole number.
at is the number of lights needed.
Round 23.46 up to 24.
4. Divide the perimeter by the number of lights.
at is how far apart the lights should be installed.
Divide 352 by 24.
Equals: 14.7´.
Notes Before Installing
Before installing the Twilight Golf Post lights, it is important to keep two things in mind during the installation planning.
Direction
Before backlling the hole, rotate the STAKE in the
ground so the notch points towards the center of the
desired illuminated area.
!
WARNING: Do not rotate light post once
inserted as this may damage the unit.
(See Figures 8 and 9 for lamp head adjustment.)
Level
Before backlling, use a bubble level to conrm the TWGP-
STAKE is level in the ground. is ensures the light will come out
of the ground at 90˚.
alignment notch
Figure 3
bubble level
Figure 4