User's Manual

ManualsBrandsToro ManualsSensorsToro Precision Soil Sensor

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment generates interference to radio or television reception, which can be determined by turning the equipment on and o, the user is encouraged to try to correct the interference

by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

The user may nd the following booklet prepared by the Federal Communications Commission helpful: “How To Identify and Resolve Radio-TV Interference Problems”. This booklet is

available from the U.S. Government Printing Oce, Washington, DC 20402. Stock No. 004-000-00345-4

The table below is provided to use as a quick reference guide for the various

Precision Soil Sensor menu options. Simply clip out and tape next to receiver

or inside the timer cover (if applicable).

Press and release the Menu button to step through the menu sequence.

PrecisionSystemMenuItem DefaultSetting Range

System Calibration Mode Automatic Manual Reset

Watering Completion Time 4 Hours 0–24 Hours

Smart Bypass Timer 24 Hours 1–199 Hours

Freeze Shut-o Mode Temp 39°F 35–45°F (2–7°C)

Signal Strength Indicator Review Only 0.0–10.0+

Battery Voltage Indicator Review Only 0.0–4.5+

Sensor Identication Code Review Only 00 00 00–99 99 99

Temperature Format Indicator °F °F or °C

Sensor Temperature

Review Only

14° F –140° F+

FCCPart15Rules