Sell Sheet

Precision
™
Soil Sensor
www.toro.com • The Toro Company • Irrigation Division • 5825 Jasmine St. • Riverside, CA • 92504 • 877-345-8676
Specifications subject to change without notice. For more information, contact your local Toro distributor.
P/N 13-1107-IRC ©2013 The Toro Company. All rights reserved.
Dimensions
• Probe body: 5” x 3 ¾” x ¾”
• Probe spikes: 4 ¾”
• Receiver body: 3” x 3 ¾” x 1 ½”
Electrical Specifications
• Receiver input power: 24 VAC
• Probe: Three AA batteries
Temperature Specifications
• Operating (Probe): 14°F to 170°F (-10°C to 77°C)
• Operating (Receiver): 14°F to 140°F (-10°C to 60°C)
• Storage: -22°F to +149°F (-30°C to 65°C)
Operating Specifications and Additional Features
• Sensor receiver hooks up to irrigation controller’s sensor port
(if available) or is wired into common wire
• Up to 500’ (152m) range, line of sight
• One sensor per receiver
• Adjustable moisture threshold in 1% increments allows the user
to set the desired moisture level
• Sensor automatically determines soil type and adjusts
calculations accordingly
• Freeze detection prevents irrigation when temperatures
approach freezing
• Smart bypass overrides the sensor for a user-defined length of
time (especially useful during system winterization)
• If the sensor is tripped while the irrigation controller is in
the middle of a watering program, the optional “Cycle Delay”
feature ensures all subsequent zones in the irrigation program
have a chance to get watered before the sensor halts watering
• Multi-color LED on the sensor probe indicates radio
signal strength
• Sensor probe’s ultra-slim ¾” profile allows it to avoid being
damaged by mowing equipment
• Extra long stainless-steel electrodes measure over 4 inches
down into the soil profile
• Sensor probe’s support stakes hold sensor firmly in place
when installed
• Easily replaceable batteries last up to 2 years with alkaline
batteries (longer with lithium)
Warranty
• Two years
How It Works
Easy Installation
• There are two components to the system - a battery-powered wireless
sensor probe and a receiver that wires into any irrigation controller’s
sensor port.
• Once installed, the sensor calculates field capacity for your soil (or the
maximum amount of water the soil can hold after excess water has
drained away) and sets that as “100%”.
• Any time the moisture level in the soil exceeds field capacity, the irrigation
controller is prevented from watering until the moisture level falls below
the level set in the receiver (default is 50% of field capacity, adjustable by
the user).
Specifying Information—
Toro Precision Soil Sensor
Model Description
PSS-KIT Precision Soil Sensor (Probe + Receiver)
1. Hook up the receiver to your
irrigation controller
2. Install the batteries to power
up the sensor probe
3. Place the probe in the ground
Visit www.ecxtra.com to download free software to help
optimize your irrigation controller’s schedule for the
Precision Soil Sensor.