Workman® HD Series The Workman® HD Series is designed with your toughest work challenges in mind, from the front bumper to the rear bumper and everything in between. Design components like an I-beam-shaped DeDion rear axle, a truss-like front space frame, integrated wheel bearings and 4-wheel hydraulic disc brakes provide the highest total towing capacity in the industry and make the Workman ready for the toughest challenges. 2015 Toro Commercial Equipment Guide 15-003-T Rev.
Workman HD Series Specifications* ® ENGINE WORKMAN HDX, NO BED, MODEL 07383 WORKMAN HDX, W/BED, MODEL 07384 WORKMAN HDX W/BED, MODEL 07384TC WORKMAN HDX - 4WD, MODEL 07386 WORKMAN HDX - 4WD, MODEL 07386TC WORKMAN HDX - D MODEL 07385 WORKMAN HDX - D MODEL 07385TC WORKMAN HDX - D - 4WD, MODEL 07387 WORKMAN HDX - D - 4WD, MODEL 07387TC WORKMAN HD, MODEL 07369 Kubota® 972 EFI, 32.5 hp (24.2 kw), 4-cycle, liquidcooled, 962 cc, 3-cylinder overheated camshaft, counterbalanced gasoline engine.
Workman® HD Series Specifications* (continued) SPECIFICATIONS COMMON TO WORKMAN HD SERIES VEHICLES FRONT SUSPENSION REAR SUSPENSION BATTERY TRANSMISSION 3RD GEAR HIGH LOCKOUT DIFFERENTIAL LOCK 4WD SYSTEM FRAME STEERING 2-POST ROPS BRAKES HYDRAULICS LIGHTS SEAT BELTS / SEATS Independent system with dual “A” frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5 3/4” travel.
Workman® HD Series Specifications* (continued) WORKMAN VEHICLE ACCESSORIES FULL AREA FLAT BED Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg). FULL FLAT BED SIDE KIT Long bed side panels, front panel and tailgate with a fixed pivot. steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139 cm).
Workman® HD Series Specifications* (continued) WORKMAN VEHICLE ACCESSORIES 2” RECEIVER HITCH KIT Provides a 2” square receiver to enable a “drawbar” hitch. TRAILER BRAKE Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes. WIRING KIT TRAILER SIGNAL Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
Workman® HDX Auto Specifications* WORKMAN HDX AUTO, MODEL 07390 / 07390TC ENGINE 28 hp (14.9 kW) Kohler LH775 Twin-cylinder, liquid-cooled electronic fuel injection ® DISPLACEMENT 747cc FUEL Gasoline COOLING Liquid TRANSMISSION Variable speed transmission with forward high-low range and reverse featuring Toro SpeedContr'l™ MAXIMUM SPEED Forward low range 11 mph (17.7 km/h), Forward high range 20 mph (32.2 km/h), Reverse 13 mph (20.9 km/h) automatic on-demand, bi-directional system.
Workman® HDX Auto Specifications* (continued) WORKMAN HDX AUTO ACCESSORIES FULL AREA FLAT BED Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg). FULL FLAT BED SIDE KIT Long bed side panels, front panel and tailgate with a fixed pivot. steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139 cm).
Workman® HDX Auto Specifications* (continued) WORKMAN HDX AUTO ACCESSORIES 2” RECEIVER HITCH KIT Provides a 2” square receiver to enable a “drawbar” hitch. TRAILER BRAKE WIRING KIT Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric trailer brakes. TRAILER SIGNAL WIRING KIT Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
