Installation and Programming Guide
26
Program Review
Use this function to review program parameters. Parameter modication is not allowed while in review mode.
Review the Program’s Parameters
Step 1 – Turn the Function dial to the Program Review position.
Step 2 – Enter the program number being reviewed.
Step 3 – Press the following buttons to review the parameters:
- Review the stations and the corresponding runtimes that are assigned to the selected program. When
pressed twice, MC-E will sequentially display all activated stations and their runtimes. To review
individual stations, enter the station number and press the button.
- Review all assigned start times in the program. When pressed, the MC-E will sequentially display all
start times beginning from the earliest. Review a specic start time by entering the start time number and
pressing the button.
- Review the program schedule. The button can also be used to review the program’s schedule.
- Review the program’s water budget for the current month.
Step 4 – Return the Function dial to the Auto Run position to exit Program Review.