Specifications

45
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
TRACTION UNIT ACCESSORIES
04062 LED Light Kit
112-9282 Operator Presence Bail Kit (ANSI/CE req.)
04266 Push Broom Brush
04123 Wheel Kit
115-1886 Traction Slow Down Kit
65-9000 Clip Kit
115-4754 Wireless Hour Meter
120-9690 Wire Harness (For Wireless Hour Meter)
117-0073 High Altitude Kit
Greensmaster
®
1000 Series Specifications
*
GREENSMASTER 1000, MODEL 04055
ENGINE
Subaru
®
Heavy-Duty Industrial, 4.3 HP, OHC, 4-cycle, CARB, EPA, EU, China certified gasoline engine with integral lighting coil. Displacement: 7.7 cu in. (126 cc).
Cast iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
FUEL CAPACITY
3.17 quarts (3.0 liters) regular grade unleaded gasoline.
TRACTION AND IMPLEMENT DRIVE
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
REEL DRIVE
Positive drive belt powered reel. Manually activated jaw-type clutch provides drive engagement/disengagement.
GROUND SPEED
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed.
DIFFERENTIAL
Peerless Series 100.
CLUTCHES
Traction: inside belt idler. Reel: jaw type.
BRAKE
Service/parking-band type.
TRACTION DRUM
Dual cast aluminum, 7.5" (19 cm) diameter.
CONTROLS
Engine mounted; recoil starter, choke, fuel shut-off. Handle mounted: hour meter, on/off switch, throttle lever, traction engage lever, service/park brake lever, on/
off light switch (optional). Frame mounted: reel drive engage lever. Safety devices: neutral interlock system, servicing/park brake, enclosed drive system. Optional:
Operator Presence Control.
HANDLE
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
TRANSPORT TIRES/KICKSTAND
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bars) tire pressure. Lift assist kickstand is standard.
REEL CONSTRUCTION
5" (12.7 cm) diameter, 11 high-carbon steel blades welded to 5 stamped steel spiders. Optional 8-blade & 14-blade reel.
WIDTH OF CUT
21" (53.3 cm)
HEIGHT OF CUT
1/16" to 1.25" (1.58-31.75 mm)
CLIP
Standard w/Clip Kit
Standard 11-Blade: .17" (4.3 mm) .25" (6.4 mm)
Optional 8-Blade: .23" (5.8 mm) .34" (8.6 mm)
Optional 14-Blade: .13" (3.3 mm) .194" (4.9 mm)
BEDKNIFE/BEDBAR
Dual screw “click” adjustment to reel. EdgeMax
TM
Microcut Bedknife standard
GRASS BASKET
Patented design: molded polyethylene, baffled and vented for high efficiency collection.
FRONT ROLLER
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200 spacing.
WEIGHT
220 lbs. (99.8 kg) with aluminum Wiehle roller, kickstand and grass basket, without transport tires and groomer.
CERTIFICATION
Designed in accordance to ANSI specifications B71.4-2012 and European Community (CE) specifications with required kits installed.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
GREENSMASTER 1000 ACCESSORIES
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale
may vary in use, design, required attachments and safety features. Consult your local
Toro Distributor.
The Greensmaster 1000 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
ROLLER OPTIONS
88-6790 Wide Wiehle Roller
52-3590 Swaged Roller
93-9045 Long Front Wiehle Roller
71-1550 Cast Iron Wiehle Roller
104-2642 Full Roller
65-8560 Front Roller Extension Kit
GROOMING OPTIONS
04134 Reverse Groomer Drive
125-3451 Forward Rotating Kit
04270 Greens Perfection Brush – Soft
04271 Greens Perfection Brush – Stiff
04283 Spring Steel Grooming Reel
04284 Carbide Grooming Reel
04285 Spiral Brush Grooming Reel
04741 Thin Blade Grooming Reel
SCRAPER OPTIONS
112-9285 Smooth Scraper
112-9288 Wide Wiehle Roller Scraper
112-9286 Scraper Brush
112-9289 Narrow Wiehle Roller Scraper
112-9287 Scraper Comb
BEDKNIFE & BEDBAR OPTIONS
115-1880 EdgeMax
TM
Microcut Bedknife (standard)
93-4262 Microcut Bedknife
108-4303 Extended Microcut Bedknife
115-1881 EdgeMax
TM
Tournament Bedknife
93-4263 Tournament Bedknife
108-4302 Extended Tournament Bedknife
93-4264 Low Cut Bedknife
112-7475 EdgeMax Fairway Bedknife
63-8600 Fairway Bedknife
94-6392 High Cut Bedknife
112-9279-03 Bedbar – Aggressive
REEL OPTIONS
93-6087 8-Blade Reel
117-1449 14-Blade Reel
04109 Dethatching Reel
TOOLS
04399 Turf Evaluator
125-5610
Paper – Reel
125-5611 Shim – Reel
94-9010 Height of Cut Bar Assembly