Installation Manual
13
Review Screen
e Review screen allows operators to review settings
for the various sensors added to the controller.
1. Press the Review button.
2. Press to the WEATHER SENSOR. Press .
3. Use to scroll through the various sensor settings.
Resetting to Factory Defaults
!
Resetting to Factory Defaults clears ALL SENSOR
SETTINGS and ALL ADDED IDs.
1. Go to the Sensors screen (page 10) and scroll down to
SMART CONNECT. Press .
2. Change the value to YES and press .
Wireless Communication Problems
e eective range of the EVO-WS Weather Sensor is 1,000 feet. at
range can be impacted by walls and/or electrical appliances that cause
radio interference.
If you experience wireless communication problems, try the following:
• Install the sensor as close to the controller location as possible. If
the signal strength is not good in one location, try another location
nearby. Sometimes moving the sensor only a few feet can greatly
improve signal strength.
SCHEDULE A
SCHEDULE B
AUX 2
RAIN SENSOR
REVIEW
WEATHER SENSOR
WEATHER SENSOR
ADJUST ---
RAIN STATUS WET
SENSOR TEMP 81
°
F
SIGNAL STRENGTH
REVIEW
→
SMART CONNECT
A B C
SOIL 1 - -
SOIL 2
SOIL 3
SENSORS
→