User's Guide

So far there are eight series of controllers with which the R-
100-Kit is compatible. Our intent is to add more series to this
list as we introduce new irrigation controllers to the market.
Irritrol
®
Brand Toro
®
Brand
Rain Dial
®
-R Series Custom Command™
Rain Dial
®
-Blue Series TCM-212 Series
Total Control
®
-R Series TCM-424 & 424-E
KwikDial
®
Series
MC
®
-E “Blue” series (Version 5.02 or later)
The R-100 remote kit has three components as noted in
Diagram 1.
Diagram 1: R-100-KIT
CL-R1 Remote CL-MR mini- CMR-ADP
Transmitter Receiver Adapter Cable
3.
“Hidden” features for remote control of the Unique
®
brand
of landscape lighting:
As an allied brand to Irritrol in the landscaping industry,
Unique plans to offer similar capabilities for remote control of
landscape lighting. For the convenience of landscaping and
irrigation professionals and by permission from Unique, the
commands for its remote lighting control are included in the
remote system described in this guide. The basic control
functions are furnished below (ahead of the description of
remote irrigation commands) in case of inadvertent activation
of lighting controls on an irrigation-only system.
Two switch over to Unique lighting remote control, after
activating the remote, repeatedly press the SETUP button
until “UL” (for Unique Lighting) appears in the display.
“of” in the display means the light control is turned off
Use the UP Arrow button to turn “on” the lighting control
Press and hold the PWR/mode button until the display
goes past “off” to “LITE”.
When the PWR/mode button is released, “L1” for light
station #1 appears along with its default remote time of 10
minutes. There are four light stations available, accessed
with the UP Arrow button (see next page for zone control).
Above L4, are “LA on” and the “LA of” for lighting all on
or lighting all off. After selection, press ENTER.
To return to irrigation remote, press and hold the
PWR/mode button until “CL” appears. Release button to
see the irrigation station #1.
12.