Operator's Manual

9
CompletingtheInstallation
NoPartsRequired
Procedure
1.Tiltthe4-in-1bucketbackandlowertheloader
arm.
2.Shutofftheengineandremovethekey.
3.Checkallhydraulicconnectionsforleaksand
correctasnecessary.
4.Checkthehydraulicuidlevelandcorrectas
necessary;refertoyourmachineOperator’s
Manual.
5.InstalltheheatshieldasshowninFigure18.
6.Closeandsecuretheenginehood.
7.Installthevalvemanifoldcovertothe4-in-1
bucketandsecureitwiththe4boltsand
washersasshowninFigure24.
Important:The4-in-1bucketmustnot
beusedwithoutthevalvemanifoldcover
installed.Thewarrantyonthevalvemanifold
assemblywillbevoidedifthecoverisnot
installedorinstalledincorrectly.
ProductOverview
g242329
Figure28
1.4-in-1bucket3.Hydraulicandelectrical
connections
2.Manifoldcover4.Loaderarm/attachmenttilt
lever
Controls
Becomefamiliarwithallthecontrols(Figure29and
Figure30)beforeyoustarttheengineandoperate
thetractionunit.
AuxiliaryHydraulicsLowFlow
Switch
Pressonthefrontoftheauxiliaryhydraulicslowow
switchtoturniton.
g239507
Figure29
1.Lowowswitch
17