Operation Manual

Figure25
1.Dipstick/llhole
3.Fillertube
2.Metalend
8.Unscrewthedipstickandwipethemetalendclean
(Figure25).
9.Screwthedipstickfullyontothellertube(Figure25).
10.Unscrewthedipstickagainandlookatthemetalend.
Iftheengineoillevelislow,slowlypouronlyenough
oilintothellertubetoraisetheleveltotheFullmark
onthedipstick.
11.Starttheengineandletitidlefor30seconds.
12.Stoptheengineandwaitfor30seconds.
13.Checktheoillevelagainandaddoilifnecessary.
Important:Donotoverllthecrankcasewithengineoil
andruntheengine;enginedamagemayresult.
ChangingtheEngineOil
ServiceInterval:Aftertherst5hours
Every50hours(Changetheengineoilmorefrequently
whenoperatingthemachineinextremelydustyor
sandyconditions.)
1.Starttheengineandletitrunfor5minutes.
Note:Thiswarmstheoilsothatitdrainsbetter.
2.Parkthemachinesothatthedrainsideisslightly
lowerthantheothersidetoensurethattheoildrains
completely.
3.Disengagetheblades(PTO).
4.Settheparkingbrake.
5.Stoptheengineandwaitforallmovingpartstostop.
6.Removetheignitionkey.
7.Openthehood.
8.Placeapanbelowtheoildrainplug.
9.Removetheoildrainplugtoallowoiltodrain(Figure
26).
Figure26
1.Drainplug
10.Whenoilhasdrainedcompletely,insertthedrainplug
andtightenitsecurely.
Note:Note:Recycletheusedengineoilproperly.
11.Cleanaroundthedipstickandunscrewthecap(Figure
25).
12.Slowlypourapproximately80%oftheengineoil
intothellertube(Figure25).RefertoServicingthe
EngineOil.
13.Checktheengineoillevel;refertoCheckingtheEngine
OilLevel.
ChangingtheEngineOilFilter
ServiceInterval:Every100hours(Changeitmorefrequently
whenoperatingthemachineindustyor
dirtyconditions.)
1.Draintheoilfromtheengine;refertoChangingthe
EngineOil.
2.Removetheoldlterandwipeofftheadaptergasket
surface(Figure27).
Figure27
1.Engineoillter
3.Adapter
2.Gasket
3.Applyathincoatofnewengineoiltotherubbergasket
onthenewlter(Figure27).
4.Installthenewltertothelteradapterbyturningit
clockwiseuntilthegasketcontactsthelteradapter.
5.Tightenthelteranadditional1/2to3/4turn(Figure
27).
22