Operation Manual

Figure6
1.Adjustmentknobs
2.Movetheseattothedesiredpositionandtightenthe
knobs.
OperatingtheHeadlights
Theheadlightsareanintegralfunctionoftheignitionswitch.
TurntheignitionkeyclockwisetotheLightsposition.
UsingtheBladeControl(PTO)
Thebladecontrol(PTO)knobengagesanddisengagespower
totheblades.
EngagingtheBlades
1.Depressthebrakepedaltostopthemachine.
2.Pullthebladecontrol(PTO)knobouttotheEngaged
position(Figure4).
DisengagingtheBlades
1.Depressthebrakepedaltostopthemachine.
2.Pushthebladecontrol(PTO)knobintothe
Disengagedposition(Figure4).
SettingtheHeightofCut
Usetheheight-of-cutlevertoraiseandlowerthemowerto
thedesiredcuttingheight.Youcansetthecuttingheightto7
differentpositionsfromapproximately30to80mm(1-1/4
to3-1.8inches).
Important:Youmustsettheheight-of-cutlevertothe
highestposition(7)whenyoutransportthemachineoff
thelawntopreventdamagingtheblades.
1.Pushandholdinthebuttonontheheight-of-cutlever
(Figure7).
G017870
1
Figure7
1.Height-of-cutlever
2.Shifttheheight-of-cutlevertothedesiredposition.
3.Releasethebutton.
StartingtheEngine
1.Openthefuelshut-offvalvelocatedbetweenthefuel
tankandtheengine(Figure8).
Figure8
1.Fuelshut-offvalve
Note:Thevalvehandleshouldalignwiththefuel
hose.
2.Sitdownontheseat.
3.EnsurethetractioncontrolpedalsareintheNeutral
position.
4.Settheparkingbrake;refertoSettingtheParking
Brake.
5.Disengagetheblades(PTO);refertoFigure4.
Note:Theenginewillnotstartiftheblades(PTO)
areengaged.
13