Operator's Manual

Figure 66

1. Bolt 5. Spring installed

2. Spacer

6. Grass Deector

3. Locknut 7. Place behind deck edge

before installing bolt

4. Spring

8. Hook end of spring

2. R emo v e the damag ed or w or n g rass deﬂector .

3. Install the bolt and n ut.

4. Place the J hook end of the spring around the

g rass deﬂector ( Figure 66 ).

Important: T he g rass deﬂector must be

a ble to lo w er do wn into position. Lift the

deﬂector up to test that it lo w er s into the

full do wn position.

Cleaning

Cleaning Under the Mower

R emo v e the g rass buildup under the mo w er daily .

1. Diseng ag e the PTO , mo v e the motion control

lev ers to the neutral loc k ed position and set

the parking brak e .

2. Stop the engine , remo v e the k ey , and w ait for

all mo ving par ts to stop before lea ving the

operating position.

3. Raise the mo w er to the transpor t position.

Waste Disposal

Engine oil, batteries , h y draulic oil, and engine

coolant are pollutants to the en vironment.

Dispose of these according to y our state and local

regulations .