Operator's Manual

BeltMaintenance
ServicingtheBelts
InspectingtheBelts
ServiceInterval:Aftertherst25hours—Inspectthebelts
andadjustasnecessary.
Every40hours—Inspectthebeltsandadjustas
necessary.
1.Removethedividerplate;refertoRemovingthe
DividerPlate(page21).
2.MovetheclutchlevertotheOffposition;referto
ControllingthePaddles(page17).
3.Examinethebeltsforwearordamage.Ifthebeltsare
wornordamaged,replacethem;refertoReplacingthe
Belts(page25).
4.Examinethepulleysforwear,damage,and
misalignment;refertoAligningthePulleys(page26).
5.Installthedividerplate;referto
InstallingtheDivider
Plate(page22).
AdjustingtheBeltTension
Clutchairgap:2.5to6.5mm(3/32to1/4inch)
1.MovetheclutchlevertotheOnposition;referto
ControllingthePaddles(page17).
2.Measuretheairgapbetweenthemotordeckandthe
rollerontheclutch(
Figure35).
G019976
1
2
3
Figure35
1.Motordeck
3.Clutchairgap:2.5to6.5
mm(3/32to1/4inch)
2.Clutchroller
3.Ifthemeasuredairgapisnotwithinthespecied
range,adjustthegapasfollows:
A.MovetheclutchlevertotheOffposition;referto
ControllingthePaddles(page17).
B.Loosenthenutsandboltsthatsecurethemotor
tothemotordeck(Figure36).
1
1
g020662
Figure36
1.Nutandbolt
C.Movethemotorpositionasfollows:
•Increasetheairgap—movethemotoraway
fromtheidlerpulley(Figure36).
•Decreasetheairgap—movethemotor
towardtheidlerpulley(Figure36).
D.Alignastraightedgeacrossthemotorpulleyand
theidlerpulley(Figure37).
24