Reference Guide

Revision 1 04-01-2021 Toro Form No 3446-962 Rev A
Maintenance Service Interval Maintenance Procedure
• Check the spark plug.
• Clean the spark arrester.
• Clean the sediment cup.
• Replace the drive belts.
Every 300 hours • Replace the paper air-cleaner element. Replace it more frequently in dusty operating conditions.
• Replace the spark plug.
Monthly
Grease the trunnions and the drum spindle.
Yearly or before storage Clean the fuel sediment cup.
Important: Refer to the
Engine Operator's Manual for additional maintenance procedures.
Tool Cleaning Process
Regular cleaning and washing with mild detergent and water will increase the life span of the machine. Clean the machine after each use, before the dirt hardens.
Check before cleaning that the fuel-tank cap and the oil-fill cap/dipstick are properly in place to avoid getting water in the engine.
Use care when using a high-pressure washer because it can damage safety decals, instruction signs, and the engine.