Reference Guide

Revision 1 04-01-2021 Toro Form No 3446-964 Rev A
Perform the necessary maintenance procedures as specified in the following tables (for complete procedures, refer to the Operator’s Manual):
Tool Inspection Process
Step
Action
1
Torque the wheel lug nuts to 108 to 122 N∙m (80 to 90 ft-lb).
2
Inflate the tires to 241 kPa (35 psi).
3
Check the tail light condition and operation.
4
Check for missing or damaged parts, especially safety devices, shields, guards, and decals; ensure that the machine starts and operates properly.
5
Check the ball hitch operation.
6
Check the safety chains.
7
Inspect the drive-belt tension and adjust it as necessary. Replace the drive belts if they show any signs of wear, cracks, glazing, or damage.
8
Check the drum for damage.
Tool Rental Center
Spring Maintenance
Guide
MMX-858H-P Mortar Mixer
Model No. 60221HD—400000000 and Up
Supplier Technical Support #:
800-888-9926 (US and Canada)
Supplier Website: www.Toro.com
PURPOSE
Follow the directions below to maintain this tool.
SAFETY
Refer to the product Operator’s Manual for complete safety information.