Operator's Manual

3.Ifthemeasuredairgapisnotwithinthespecied
range,adjustthegapasfollows:
A.MovetheclutchlevertotheOFFposition;
refertoControllingthePaddles(page20).
B.Loosenthenutsandboltsthatsecurethe
motortothemotordeck(Figure35).
g020662
Figure35
1.Nutandbolt
C.Movethemotorpositionasfollows:
•Increasetheairgap—movethemotor
awayfromtheidlerpulley(Figure35).
•Decreasetheairgap—movethemotor
towardtheidlerpulley(Figure35).
D.Alignastraightedgeacrossthemotorpulley
andtheidlerpulley(Figure36).
g020663
Figure36
1.Motorpulley
5.Idlershaft
2.Idlerpulley6.Jamnut
3.Belt
7.Setscrew
4.Beltguide
8.Straightedge
E.Ifneeded,pivotthemotoronthemotordeck
untilthemotorpulleyandtheidlerpulley
arealignedtothestraightedge(Figure36).
F.Tightenthenutsandboltsthatsecurethe
motortothemotordecktoatorqueof18
N∙m(13ft-lb).
G.Checktheairgapbetweenthemotordeck
andtherollerontheclutch.Iftheairgapis
notwithinthespeciedrange,repeatstep3
untiltheairgapmeasurementiswithinthe
speciedrange.
H.Installthedividerplate;refertoInstalling
theDividerPlate(page25).
Important:Ensurethatthepaddlesdonotrotate
whentheclutchleverisintheOFFposition.
ReplacingtheBelts
ServiceInterval:Every2years—Replacethebelts.
RemovingtheBelts
1.MovetheclutchlevertotheOFFposition;refer
toControllingthePaddles(page20).
2.Removethedividerplate;refertoRemovingthe
DividerPlate(page24).
28