Operator's Manual

Setup
1
AssemblingtheBlower
Partsneededforthisprocedure:
Installtheblowertubeandthentheinletcoverontotheblowerhousing.
NOTICE!Youmustinstalltheblowertubebeforeinstallingthe
inletcoverbecausetheinletcoverhooksontotheblowertube.
Theblowerwillnotrununlessthebottominletcoverislocked
inplace.
2
ConvertingfromBlowertoVacuum
Partsneededforthisprocedure:
WARNING
Theimpellerrotatesforafewsecondsafteryouturnoffthe
blowerandcancutorinjurengers.
Donotremovethebottominletcoverwhenthemotorisrunning
orwhentheunitispluggedintoapoweroutlet.
1.Removetheinletcoverandtheblowertubefromtheblower
housing.
2.Installthevacuumtubeontotheblowerhousingandconnectthe
lowervacuumtubetotheuppertube,securingitwiththesupplied
fastener.
NOTICE!Thevacuumwillnotrununlessthevacuumtube
islockedinplace.
Note:Youmayneedtopushtheconnectorrmlytoensurethat
itseatsallthewayintothevacuumtube.
3