Installation Instructions

1. Attach both Mounting Plates (RH and LH) to the
inside of the Sand Blade 240 as shown in Fig. 1.
Put on nuts but do not tighten.
2. Slide the Sand Blade 240 toward the Sand Pro.
3. Attach the (4) U-Bolts to the frame of the Sand
Pro through the Mounting Brackets. The inside
U-Bolts attach around the channel under carriage
of the Sand Pro. See Fig. 2. Secure all nuts.
4. Connect the springs to the lower hole on the
Mounting Plates. See Fig. 1.
5. Hook the S-Hook of the chain into the Mounting
Bracket. This places the Sand Blade in transport
position.
Mounting Plate R.H.
Mounting Plate L.H.
Fig. 1
Fig. 2
©
The TORO Company - 1994
All Rights Reserved
FORM NO. 01-502-1770
INSTALLATION
INSTRUCTIONS
MODEL NO. 44901
SAND PRO 5000 MOUNTING KIT