Installation Instructions

FormNo.3365-510RevA
FenderKit
Tow-TypeChassisforProPass-200TopDresser
ModelNo.44705
InstallationInstructions
Installation
1.Removethefrontandrearbolts,washersandnuts
securingthetopcrossmemberstothefrontandrear
framebraces(Figure1).
Figure1
1.Removethesebolts,
washersandnutsonboth
sides
2.Crossbrace
2.Usingthebolts,washersandnutsremoved,secure
afendertoeachsideofthetowchassis(Figure2).
Torquetheboltsto67–83ft-lbs(89–113N-m).
Figure2
1.Fender2.Fenderstrut
3.Using3/8inchangeboltsandangenuts,secure
thefrontandrearofeachfendertotheframebraces
withfenderstruts(Figure2).Torquetheboltsto
27–33ft-lbs(37–45N-m).
Note:IfinstallingaHydraulicPowerPack,Model
44713,skiptheremainingsteps.
4.Mounttheleftandrightrearsupportgussetstothe
rearofthetowchassiswith(4)3/8x1inchange
boltsandangelocknuts.
Note:Theleftgussethasasmalldimpleinthe
triangularcutouttohelpdistinguishitfromtheright
gusset(
Figure3).
Figure3
1.Rightgusset
2.Leftgussetwithdimple
Important:Makesurethetopofthegussets
arealignedwiththetopofthetowchassiscross
members.
5.Torquetheboltsto27–33ft-lbs(37–45N-m).
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved