Installation Instructions

56
BalancingtheAgitation
BypassValve
NoPartsRequired
CheckingSystemandAgitation
BypassPressure
1.Engagetheparkingbrake,andstarttheengine.
Note:Allowtheengineandhydraulicsystemto
warmfor10minutes.
2.EnsurethatthemastersectionswitchtotheOFF
position.
3.Setthespray-pumpswitchandthetankagitation
switchtotheONposition.
4.Settheleft,center,andrightsectionswitches
totheONposition.
5.Settheenginespeedtofast.
6.OntheGeoLinkcontrolconsole,pressthe
SPRAYRATECONTROLLERicon.
7.Inthesprayratecontrollerdialogbox,pressthe
RATECONTROLMODEiconuntilmanualmode
displays(Figure276).
g303643
Figure276
1.RATECONTROLMODEicon
(manualmode)
3.Incrementicon(+)
2.Decrementicon(-)
8.Pressthedecrementicon(-)orincrementicon
(+)toadjustthespraysystempressure(Figure
276)to6.9bar(100psi).
9.Onthemachine,setthetankagitationswitchto
theOFFposition.
10.Observethespraysystempressure.Ifthe
spraysystempressureis6.9bar(100psi),the
agitationvalveiscorrectlyadjusted.
Ifthespraysystempressurechanged,adjust
theagitationbypassvalve;refertoAdjustingthe
AgitationBypassValve(page123).
AdjustingtheAgitationBypass
Valve
1.WiththetankagitationswitchintheOFFposition,
walktothebackofthemachineandlocatethe
agitationbypassvalve.
g316159
Figure277
1.Actuator(agitationvalve)
2.Agitation-bypassvalve
2.Adjusttheagitation-bypassvalve(Figure277)
untilthegaugeindicates689kPa(100psi)
sprayersystempressure.
3.SetthetankagitationswitchtotheONposition
andobservethespraysystempressure.
Note:Ifthespraysystem-pressuregauge
indicatesgreaterthanorlessthan6.9bar(100
psi),repeatsteps1and2.
4.SetthetankagitationswitchtotheOFFposition
andobservethespraysystempressure.
Note:Ifthespraysystem-pressuregauge
indicatesgreaterthanorlessthan6.9bar(100
psi),repeatsteps1and2.
123