Operator's Manual

ManualsBrandsToro ManualsAttachmentsFoam Marker Kit, Skid Sprayer

©The TORO Company - 2000

To assure maximum safety, optimum

performance, and to gain knowledge of

the product, it is essential that you or any

other operator of this equipment read and

understand the contents of this manual

before the vehicle engine is ever started.

Pay particular attention to the SAFETY

INSTRUCTIONS highlighted by the

triangular safety alert symbol.

The safety alert symbol means

CAUTION, WARNING or DANGER—

personal safety instruction. Failure to

comply with the instruction may result in

personal injury.

BEFORE OPERATING:

1. Operate this machine only after reading and

understanding the contents of this manual. A

replacement manual is available by sending

complete model and serial number to: Hahn

Equipment Co, 1625 N. Garvin, Evansville, IN

47711.

2. Learn how to operate the Foam Marker and

how to use the controls properly. DO NOT let

anyone operate this equipment without first

receiving thorough instructions.

3. Keep all shields, safety devices and decals in

place. If a shield, safety device or decal is

malfunctioning, illegible or damaged, repair or

replace it before operating the machine.

MODEL NO. 41417-200000101

OPERATOR’S

MANUAL

FORM NO. 92-0401 REV A

SAFETY INSTRUCTIONS

Keep this Operator’s Manual in the plastic tube On the side of the Belt Guard of the Skid Sprayer.

It is very important that all persons operating this equipment have easy access to these instructions at

all times.

Carefully read and follow the Installation Instructions that are provided with this equipment and the

Safety Instructions in the Vehicle Operator’s Manual.

This safety-alert symbol is used to call attention to a dangerous situation, which could result in

serious injury or death to the operator or a bystander.

Safety, mechanical and some general information in this manual are emphasized. DANGER,

WARNING and CAUTION identify safety messages. Whenever the triangular safety symbol appears,

it is followed by a safety message that must be read and understood. For more details concerning

safety, read the Safety Instructions that follow. IMPORTANT identifies special mechanical information

and NOTE identifies general information worthy of special attention.

These instructions are provided as a guide for the safe operation and maintenance of this equipment.

However, the operator’s personal safety, as well as those persons in the work area, will depend on the

careful actions and good judgement of the operator.

To reduce the potential for injury or death, comply with the following safety instructions.

4. Chemicals can injure persons, animals, plants,

soils or other property. To eliminate environmental

damage and personal injury:

A. Select the proper chemical for the job.

B. Follow manufacturer’s instructions on

chemical container labels. Apply and handle

chemicals as recommended.

C. Handle and apply chemicals with care.

Wear goggles and other necessary protective

equipment. Handle chemicals in well ventilated

areas. Never smoke while handling chemicals.

D. Properly dispose of chemical container

and unused chemicals.

5. Make certain everyone is clear of the machine

before starting the engine.

for the Skid Sprayer

FOAM MARKER KIT

Summary of content (4 pages)

PAGE 1
FORM NO. 92-0401 REV A MODEL NO. 41417-200000101 OPERATOR’S MANUAL FOAM MARKER KIT for the Skid Sprayer To assure maximum safety, optimum performance, and to gain knowledge of the product, it is essential that you or any other operator of this equipment read and understand the contents of this manual before the vehicle engine is ever started. Pay particular attention to the SAFETY INSTRUCTIONS highlighted by the triangular safety alert symbol.
PAGE 2
SAFETY INSTRUCTIONS WHILE OPERATING: 6. If equipment begins to vibrate abnormally, stop immediately. Shut off the vehicle engine and disengage all power. Repair all damage before commencing operation. 7. Before servicing or making any adjustments to the Foam Marker: A. Stop the vehicle and set the parking brake. B. Shut off the vehicle’s engine and remove key from ignition. C. Disengage all power and wait until all moving parts have stopped. 8. Keep all nuts, bolts and other fasteners tightened securely.
PAGE 3
OPERATION CAUTION The contents of the Foam Marker Tank is under pressure. Loosening fittings under this comdition could result in contents spraying into eyes. To relieve pressure from the Tank, switch the On/Off switch to OFF and, direct the foam to the right or left boom using the Foam Control Switch. 5. Start marking system and make a test pattern on the ground. If the foam is too dry, it will flow in unsteady high pressure surges. If the foam is too wet, it will flow in a watery consistency. 6.
PAGE 4
The Toro General Commercial Products Warranty A Two-Year Limited Warranty Conditions and Products Covered The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your 1996 or newer Toro Commercial Product (“Product”) purchased after January 1, 1997, to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first.