MODEL NO. 41413 SET-UP AND PARTS LIST L HIGH PRESSURE PUMP KIT for the SKID SPRAYER Refer to the illustrated Parts List for the details of parts used in assembling the KID) SPRAYER, NOTE: In the following instructions, "thread sealer refers to Teflon thread tape. 1o Remove and discard 90° elbow a1 pump suction, making sure to retain all fittings. Apply thread sealer and install 3-way ball valve in place of discarded 80° elbow. See FIG. 1. 2.
12. Apply thread sealer, and attach male end of Spray Gun Hose Assembly 1o Spray Gun. PUMP SYSTEM: A WARNING & OPERATING THE SKID SPRAYER WITHOUT SAFETY SHIELDS In PLACE CAN CAUSE PERSONAL INJURY. ® HAVE ALL SAFETY SHIELDS IN PLACE BEFORE OPERATION Determine which of the twe Pump systems you will be using for your particular spraying operation. FOR HIGH VOLUME SPRAYING: (i.e. Boom Spraying) use the Centrifugal Pump system. install the Drive Belt on the Engine and Centrifugal Pump Pulleys as shown in FIG. 4.
PUMP CONTROL. (92-0230) Ret! Part No. Description Qty Hef | Part No, Description Qty 1 [92-3574 j Hose Bab 1 11 [92-8584 [Threaded Guide 1 @ [92-357% [Barb Nut 1 12 |92-3585 [Tension Spring 1 13 [e-3576 |O-Ring 2] 13 192-3586 [Tension Spring Retainer 1 4 92.
DIAPHRAGM PUMP (82-0220) Fretful Part No. Description Qly Ref | Part No.
PUMP SYSTEM Ref| Part No. Description Qty Fef | Part No. Description Qty 1 141380 Spurn Pulley 1 15 92-0314 Hag British Std. Pipe 2 R 182-0048 [Quakers 2 16 192-0045 Hose Clamp 2| 83-8463 Flange Extension Ass'y 1 17 192-0236 Hiss Barb 1" MPT 92-0222 [Gear Reduction Kit 1 18 [20-36-AGED HHS 6116 NCx 3-1/2 2] 5 192.
GEAR REDUCTION KIT Ref ! Part No, Description Oy Het | Part No.
