Installation Instructions

ManualsBrandsToro ManualsSprayersRear Work Light Kit, Multi Pro Turf Sprayer Vehicle

FormNo.3379-282RevA

RearWorkLightKit

MultiProTurfSprayerVehicle

ModelNo.41206

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

InstallingtheRearWorkLights

Partsneededforthisprocedure:

2LEDworklight

1Light-mountbracket

2Lightbracket

12Nut

Carriagebolt

Splitlockwasher

4U-Bolt

Switchbracket

1Wiringharness

Cableties

Carriagebolt

Procedure

1.Parkthemachineonalevelsurface,stoptheengine,set

theparkingbreakandremovethekeyfromtheignition.

2.AssembletheLEDlightontothelightbracketmount

(

Figure1).

g025618

Figure1

1.Lightbracketmount

5.Carriagebolt

2.Nut6.Nut

3.Splitlockwasher7.Carriagebolt

4.Lightbracket8.LEDlight

3.InstallthelightmountbrackettothetopoftheROPS

assembly(Figure2).

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3379-282*A

Summary of content (2 pages)

PAGE 1
Form No. 3379-282 Rev A Rear Work Light Kit Multi Pro Turf Sprayer Vehicle Model No. 41206 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation 2. Assemble the LED light onto the light bracket mount (Figure 1).
PAGE 2
6. Route the wiring harness to the ROPS assembly with the cable ties. 2 1 7. Connect the wiring harness to the fuse block and grounding wire to the grounding block (Figure 5). 3 Note: The fuse block and grounding block is located under the seat of the machine. 1 2 4 g025552 Figure 2 1. Nut 2. ROPS assembly 3. U-bolt 4. Light mount bracket 4. Connect the wire harness to the LED lights (Figure 3). 3 g025555 4 Figure 5 1 2 g025553 Figure 3 1. Wire harness 2. LED light 5.