FORM NO. 93-0648 OPERATOR'S, MODEL NO. 41193 SET-UP AND PARTS MANUAL AGITATOR ASSEMBLY for the INJECTOR PRO™ Spray System To assure maximum safety, optimum The safety alert symbol means performance, and to gain knowledge of the CAUTION, WARNING, or DANGER ~ product, iris essential that you or any operator personal safety instruction. Failure to comply of this equipment read and understand the with the instruction may result in personal contents of this manual before the vehicle injury.
SAFETY AND INSTRUCTION DECALS The following safety and instruction decals are installed on the Injector Pro™ Spray System Agitator. If any become damaged or illegible, replace them. Decals and part numbers are listed below and in the parts catalog. Order replacements from your Authorized Toto Distributor. Part No. 93-0815: Located on side of Agitator INSTALLATION 1. Remove Plastic Knobs from Plug in top of Injection Tank, lift Plug out of Tank and store for later use. 2.
CONTROLS and OPERATION AGITATOR POWER SWITCH (FIG. 3): Located on the Monitor Control Box on the left side of the Drivers seat. This controls operation of the Agitator during application. The CHEM 2 switch controls an optional second Agitator in conjunction with an optional second Injection System. 1. Agitator Power Switch AGITATOR RUN/PULSE/OFF SWITCH (FIG. 4): Agitator will cycle on and off automatically at about a 3:1 idle/agitating ratio. When set to the "OFF" position, Agitator will not function.
AGITATOR ASSEMBLY (92-8597) Ret | Part No. Description Qty) 1 |93-0602 [Reverse-Rotation Agitator 1 2 |93-0816 [Decal 1 3 93-0807 {Plastic Knob 2 4 j93-0606 [HHS, x §/8" 8.8, 3 5 3-0806 [Spit Lock Washer 9 18 3-0804 |Agitator Bracket 1 7 3-0803 |Agitator Bushing Assembly 1 8 |o3-0608 j-Ring 2 2 3.0601 [Set Screw, X 3/16" 8.
