MODEL NO. 41191-40001 & UP FORM NO. 93-0646 SET-UP AND PARTS LIST INJECTOR PRO™ PUMP PACKAGE for the Injector Pro™ System The following instructions apply to the installation of a Injector Pro Pump Package. If the single Injector Pro System has not yet been installed, do so before continuing with following instructions. For instructions on operating the Injector Pro™ Pump Package see the injector Pro™ System Operator's Manual.
3. Loosen the screw and remove the cover plate on the back of the Injection Pump Housing. See Fig. 3. 1. Cover Plate 2. Injection Pump @ Housing 5. Chem 2 Monitor 3, Grommet Control Cable 4, Inge rt the Grommet into the hole in the center of the Saddle Shelf. . 5. Route the two cables from the injector Control Wiring Harness through the grommet ed hole and the hole in the Pump Housing, to connect with the mating connectors inside the Pump Housing. 4. Chem 2 Injector Control Cable 6.
CHEMICAL SUPPLY HOSE (Injector Pump to injection Manifold): 1. Remove the hex plug assemble the two reducer bushings, close nipple, adapter, check valve and barbed elbow into the second injection tee. See FIG. 7. 1. Reducer Bushings 4, Check Valve 2. Close Nipple 5, Barbed Elbow 3. Adapter 8. _?econ Injection ae 2. Attach one end of the 3/8" x 48" Chemical Supply Hose to the barbed elbow and secure with a hose clamp. 3.
INJECTION PUMP ASSEMBLY (92-8447) [Ref Part No. [Description Oty Heartfelt No. Ibncrlpfinn Qty 1 j92-8382 [Female Flat Face Coupling 1 [93-1089 over 1 2 2-8489 [Hose Barb 1/2 MPT x 3/8" 2 83-1090 [Gasket 1 B 96609 Hose Clamp 2 [26 [92-8458 [Close Nipple, 1/2" 1 @ [92-8570 calibration Hose 1 127 193.
INJECTION PUMP REPLACEMENT PARTS Re fl Part No. Description Qty Ref| Part No.
INJECTION TANK ASSEMBLY (92-8449) Regret Part No. | Description Gty fee Part No. Description Gty 1 3-0756 [injection Tank Lid 1 18 141314 [Close Nipple 1/2" NPT 1 P 28381 |Male Fiat Face Coupling 1 16 192-8571 |Rinsing Nozzle 1 [3 192.8452 [90° 81 Elbow ST'N ST'L 2 20 {93-0767 |8 Gallon Strap Assembly 1 |4 183-0605 [Hex Hd Cap Screw 1/4 x 5/8" 3 21 [03-0758 er Conner Buckle 1 6 193-0607 [Male Threaded Knob 2 22 1356308 [Flat Washer 3/8" 5 6 [93-0806 [Lock Washer 1/4" 2 23 |20-48-AGD [Hex HD.
CHECK VALVE Ref | Part No. Description Qty 1 [92-8558 [Chemical Supply Hose 1 (2 98808 Hose Clamp 2] 3 Jarrod l60° Nozzle Body 1 4 p2e1 I Check Valve 1 5 1288 Outlet Adapter 1 6 j41288 Close Nipple 1 7 sieve Reducing Bushing 3/4 x 1/4" 1 B8 3o Reducing Bushing 1 x 3/4" 1 GUARD & GROMMET Ref | Part No.
INJECTION PUMP MOTOR (93-0766) Ref{ Part No. Description Gty [Ref | Part No. Description Qty 1 193-1065 [Gear Motor Assembly 1 11 193-1056 [Cover 1 2 |93-1067 |Pan Head Screw 1 12 [93-1067 |Pan Head Screw 1 13 |83-107¢ |Cable Clamp 1 13 [93-1057 [Pulley 1 4 [93-1068 |Flat Washer 1 14 193-1072 [Hex Socket Hd.
