Installation Instructions

ManualsBrandsToro ManualsVehiclesSingle Nozzle Kit, Multi-Pro Turf Sprayer

FormNo.3389-443RevB

SingleNozzleKit

Multi-ProTurfSprayer

ModelNo.41023

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

UseofthisproductmaycauseexposuretochemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orotherreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Hoseclamp3

Straighttting

O-ring

Ballvalve1

Hose1

Installthein-linehoseassembly.

Pipe1

Boomcap1

Singlenozzleplate

Singlenozzlestrap

Nozzlemountassembly1

Clampassembly

Hose-barbelbow1

Hoseclamp1

Nozzle1

Plasticreducer1

Bolt3

Washer1

Flangenut3

Mountthekittotheboom.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3389-443*B

Summary of content (8 pages)

PAGE 1
Form No. 3389-443 Rev B Single Nozzle Kit Multi-Pro Turf Sprayer Model No. 41023 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
PAGE 2
1 2 Preparing the Machine Installing the In-Line Hose Assembly No Parts Required Parts needed for this procedure: Procedure 3 Hose clamp 3 Straight fitting Chemicals are hazardous and can cause personal injury. 3 O-ring 1 Ball valve • Read the directions on the chemical labels before handling the chemicals and follow all manufacturer recommendations and precautions. 1 Hose CAUTION Procedure 1. • Keep chemicals away from your skin.
PAGE 3
Mounting the Kit to the Boom Parts needed for this procedure: 1 Pipe 1 Boom cap 1 Single nozzle plate 1 Single nozzle strap 1 Nozzle mount assembly 1 Clamp assembly 1 Hose-barb elbow 1 Hose clamp 1 Nozzle 1 Plastic reducer 3 Bolt 1 Washer 3 Flange nut Procedure 1. Secure the clamp assembly and the nozzle mount assembly to the pipe using 1 bolt, 1 washer, and 1 flange nut (Figure 2). 2. Place the cap on the top of the pipe (Figure 2). 3.
PAGE 4
g220679 Figure 2 Machine with a 1-Piece Center-Boom Section 1. Cap 5. Plastic reducer 9. Elbow-hose barb 2. Flange nut 6. Nozzle-mount 10. Single nozzle strap 3. Washer 7. Hose clamp 11. Pipe 4. Nozzle 8. Bolt 12. Single nozzle plate 4 13.
PAGE 5
g220667 Figure 3 Machine with a 2-Piece Center-Boom Section 1. Nut 4. Single nozzle strap 2. Single nozzle plate 5. Bolt 3.
PAGE 6
g220668 Figure 4 Machine with a 3-Piece Center-Boom Section 1. Nut 4. Single nozzle strap 2. Single nozzle plate 5. Bolt 3.
PAGE 7
Notes:
PAGE 8
Declaration of Incorporation The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s) conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain Toro models as indicated on the relevant Declarations of Conformity. Model No. 41023 Serial No.