Operator's Manual

6
3352-464
Product Overview
1
2
3
4
5
6
8
12
10
11
9
m-6936
7
1. Auger/impeller lever
2. Speed selector lever
3. Quick Stick discharge
chute control
4. Traction lever
5. Fuel tank
6. Engine oil fill tube/ dipstick
7. Chute deflector
8. Discharge chute
9. Fuel shutoff valve
10. Skid (2)
11. Auger
12. Scraper
1
6
3
4
5
2
1. Ignition switch
2. Choke
3. Throttle
4. Primer
5. Electric starter
6. Recoil starter
Setup
Installing the Upper Handle
Assembly
1. Lift and rotate the upper handle assembly and
position it over the lower handle.
Note: Ensure that
the 2 cables attached
to the Quick Stick (A)
are routed inside the
upper handle legs
and that the 2 lever
cables and the wire
for the headlight are
not pinched between
the handle sections.
m-7698
A
2. Secure the upper handle assembly with 4 handle
bolts, 4 curved washers, and 4 locknuts from the
loose parts bag.
m-7698