Operator's Manual

4.Loosentheangenutsthatsecuretheselectorplate
tothecontrolpanel(Figure23).
Figure23
1.Speedselectorplate
2.Flangenuts
5.Shiftthespeedselectorlevertothirdgearandpush
downonthespeedselectorplatetomovethedrive
assemblytotheright.
Note:Thedriveassemblyshouldbe1/8inch(3
mm)fromtherollpin;ifnot,slidetheselectorplate
(Figure23)untilthegapis1/8inch(3mm);refer
toFigure24.
Figure24
1.Rollpin
3.1/8inch(3mm)
2.Driveassembly
6.Withthedriveassembly1/8inch(3mm)fromthe
rollpin,tightentheangenutsthatsecurethespeed
selectorplate.
7.ShiftthespeedselectorlevertotheR(Reverse)
positionandbacktothirdgeartocheckthe
adjustment.
8.Ifthespacebetweentherollpinandthedrive
assemblyismorethan3/16inch(5mm),repeat
steps3through6.
9.Installthebottomcoverandreturnthesnowthrower
totheuprightposition.
10.Connectthewiretothesparkplug.
CheckingtheAugerGearbox
Grease
ServiceInterval:Yearly
Theaugergearboxispackedwith5oz.(140g)of
LubriplateMAG-1(alow-temperature,high-pressure
grease)andissealedatthefactory.Thepipeplug
(Figure25)isforfactoryuseonly;youdonotneedto
checkoraddgrease.Ifthegearboxisleakinggrease,
contactanAuthorizedServiceDealer.
Figure25
1.Pipeplug
ChangingtheEngineOil
ServiceInterval:Aftertherst2hours
Yearly
Every25hours
Changetheengineoilaftertherst2operatinghours,
thenyearlythereafter.Ifpossible,runtheenginejust
beforechangingtheoilbecausewarmoilowsbetter
andcarriesmorecontaminants.
18