FORM NO. 3316389 OPERATOR’S MANUAL ~ MODEL NO. 38310~ & UP POWER SHOVEL™ ) IMPORTANT SAFETY INSTRUCTIONS A\ WARNING To assure maximum safety, best performance, and to gain knowledge of the product, it is essential that ou other operator of the Power Shovel read and understand the contents of this manual before the moor is ever started. Pay particular attention to the safety alert symbol fa which means CAUTION, WARNING, OR DANGER ~“personal safety instruction.
A SAFETY INSTRUCTIONS 18. Clear snow from slopes by going up and down, never across the face. Use caution when changing directions. Never clear snow from steps slopes. 17. Do not overload the Power Shovel by clearing snow at too fast a rate. Let the unit do the work, 18. ff & solid object is hit or the Power Shovel vibrates abnormally, stop the Power Shovel and wait for all movement to stop. Disconnect extension cord and check the Power Shovel immediately for possible damage, an obstruction, or loose parts.
ASSEMBLY INSTRUCTIONS A\ CAUTION Before assembly, inspect internet wiring and wire harness assembly for damage. If damaged, do not assemble. Contact your TOR Service Dealer or TOR Service Center, During assembly, be careful not to damage the internal wiring inside tubing. DAMAGE TO THE INTERNAL WIRING COULD CAUSE SERIOUS ELECTRICAL SHOCK RESULTING IN PERSONAL INJURY DURING OPERATION, if damage does occur, do not assemble.
ASSEMBLY INSTRUCTIONS 248 Figure 3 1. Countersunk nut 2. Slotted screw Note: if the internal wiring is blocking the hole, gently rove the wiring to one side using shipping wire, (Discard shipping wire after assembly is complete.) 5. Loosely secure adjustable handier to tube with carriage bolt and knob (supplied in loose parts bag) as shown in Figure 4. 5 Figure 4 1. Carriage bolt 2. Knob 8. Move adjustable handle to desired operating po~ sit ion by sliding handle to desired height and tightening knob.
OPERATING INSTRUCTIONS PREPARATION 1. Tie extension cord to the lower handle of contort grip {Fig. 8) before connecting to the Power Shovel cord. This helps prevent the separation of the cords during operation. 2. Plug the extension cord into a wall outlet and insert kay into hole located on the front side of the control grip (Fig. 8). Figure 8 1. Key 2. Switch Bar Use only a UL approved extension cord suitable for outdoor use in cold temperatures (16 Gage minimum). 3.
MAINTENANCE A\ CAUTION To prevent accidental operation of the Power Shovel while performing maintenance, disconnect extension cord and remove key from handle. LUBRICATING POWER SHOVEL The Power Shovel does not have to be lubricated as all bearings are lubricated for the life of the product. PREPARE POWER SHOVEL FOR STORAGE 1. Examine the Power Shovel thoroughly for worn, loose, or damaged parts. if parts repair or replacement is necessary, contact your local Authorized TOR Service Dealer for assistance. 2.
N 7 . The Toto Promise A One Year Full Residential Use Warranty The Toto Company warrants this TOR Product for one year against defects in material or workmanship. Te receive a replacement or repair, at Toto's option, just return the complete unit, postage prepaid, to the seller or any TOR Electric Service Dealer or the TOR Service Center, 5300 Shoreline Blvd., Mound, MN 55364, along with proof of purchase. This warranty covers product defects only. it does not cover incidental or consequential damages.
