Specifications

2
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
Groundsmaster
®
3280-D Specifications
*
GROUNDSMASTER 3280-D, 2WD - MODEL 30344
GROUNDSMASTER 3280-D, 4WD - MODEL 30345
ENGINE
Kubota,
®
3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement:
1123cc. High idle: 3200 rpm no load (uninstalled) 3100-3200 installed. Remote-mounted 5" Donaldson
®
air cleaner. Fuel filter/water separator.
EPA Tier IV Final Compliant.
FUEL CAPACITY
11.3 gallon (42.8 liter), diesel fuel. 2008 and newer models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).
GAUGES & PROTECTION
SYSTEMS
Hour meter, fuel gauge, 4 light warning cluster gauge: oil pressure, water temperature, amps and glow plug. High water temperature shut-down. Hood lock, foldable
ROPS.
RADIATOR
Mid-mounted industrial radiator construction, 8.5 fins per inch. Approx. 7 quart (6.6 liter) capacity. Remote mounted 1 quart
(.95 liter) expansion tank.
TRACTION DRIVE
Hydrostatic U-type transmission with single pedal control of forward/reverse ground speed. 25 micron replaceable filter. Axle serves as reservoir for hydrostatic
transmission; also serves the power steering and lift valve. Approx. lubrication capacity: 6 quarts (5.7 liters). 4WD: Rear axle is mechanically driven from front axle
by a universal shaft. An on-demand, bi-directional overrunning clutch prevents rear tire scuffing in turns and maintains turning radius, same as in 2-wheel drive
mode. Approx. 3.1 quart (2.9 liter) gear lubricant capacity.
SPECIFICATIONS COMMON TO GROUNDSMASTER 3280-D & 3320 SERIES
GROUND SPEED
0-10 mph (0-16.1 km/h), infinitely variable.
MAIN FRAME
All welded formed steel.
TIRES/WHEELS/ PRESSURE
Two front traction drive tires-23 x 9.5-12 with demountable rims. Two rear steering tires: 2WD: 16 x 6.5-8;
4WD: 18 x 6.5-8. All tires are tubeless and 4-ply rated. Recommended tire pressure: 20 psi (138 kPa).
Optional Wide Tire w/ Rim, 23 x 10.5-12, Part No. 119-2864, 4-ply, or 69-9880, 6-ply.
BRAKES
Individual 7" x 1.75" (17.8 cm x 4.4 cm) drum type wheel brakes and parking brakes on front traction wheels. Dynamic braking through traction drive.
SEAT & SUSPENSION
Deluxe seat with adjustable fore/aft travel, Model 30398. Requires air ride, Model 30313, or mechanical seat suspensions, Model 30312. Adjustable for height and
weight. Available armrests model 30707: required Part No. 108-9687 Armrest adapter kit. 12V Power Port/Electrical Accessory Kit, Model 30382, required for use of air
ride seat suspension.
STEERING
Hydraulic power steering. 14" (36 cm) tilt steering wheel, released and locked by a single lever control.
OPERATOR AREA
Multi-tiered beverage holder, storage box, retractable seatbelt, and available 12V power port Model 30382.
IMPLEMENT DRIVE
1" (2.5 cm) diameter PTO shaft clutched by a torque-teamed “HA” section V-belt. PTO engaged by electric clutch/brake. Connection to implement is with a universal
joint and telescoping shaft assembly.
IMPLEMENT LIFT
Twin 2.75" hydraulic cylinders operate lift arms. Hydraulic counter balance for greater stability and traction.
CONTROLS
Foot-operated traction and brake pedals. Hand-operated throttle, PTO switch, brake lock, implement lift switch, ignition switch and
glow plugs.
ELECTRICAL FEATURES
12-volt maintenance free battery with 530 cold cranking amps at 0° F (-18° C), 80 minute reserve capacity at 80° F (27° C). 40 amp alternator with I.C. regulator/
rectifier. 2 amp standard control module log circuit. Seat switch, PTO, traction and parking brake interlock switches. Easy access to fuse panel. Available 12V Power
Port/Electrical Accessory Kit, Model 30382.
DIMENSIONS & WEIGHT
Width Length Height w/ROPS Down Height w/ROPS Up Dry Weight Wheelbase
GM3280-D 2WD 47" (119 cm)
[1]
83.5" (212 cm) 56" (142 cm) 77" (195 cm) 1,340 lbs. (608 kg) 46" (117 cm)
GM3280-D 4WD 47" (119 cm)
[2]
85" (216 cm) 56" (142 cm) 77" (195 cm) 1,520 lbs. (690 kg) 47.5" (121 cm)
CLEARANCE
Front ground clearance: 6" (15.2 cm), 4WD: rear ground clearance of 4.25" (10.8 cm).
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
CERTIFICATION
Certified to meet the American National Standard Institute’s (ANSI) specifications, B71.4-2004 and applicable Federal and State regulations based thereon.
[1] Measured from outside of front tires.
[2] Measured from outside of rear tires.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.