MODEL NO. 30792 FORM NG, 3311-818 INSTALLATION INSTRUCTIONS LEAF MOOCHER ATTACHMENT FOR GROUNDSMAN 67° CUTTING UNIT MODEL 30562 Since this instruction sheet covers only a minimal amount of information necessary to maintain and operate U T erred 1o for instructions concerning safe operation and proper maintenance procedures. REMOVE CUTTING UNIT FROM TRACTION UNIT 1.
. Remove rear carriage bolt and flange nat securing rear of deflector 1o cutting unit (Fig. 4}, Figure 6 £ Mounting caseworker 7. Secure mule her screen and rear of deficient to cutting unit with x 17 tg. carriage Bolt, . supplied in kit, and Range nut, previously re Figure 4 moved (Fig. 7). 1. Grass detector 2. Carriage hoot 3. Bar move (2) cap screws and {lane busts plugging mounting holes in deck tunnel {Fig.
Figure 8 § Taunting hafts with (6} x 3/4" 1. cap screws and wishers, 12, secure mulches screen and rear side” deflector to cutting unit with B/1818 « 17 g carriage bolt and Range nut, 13, Secure moocher screen to felt side of cutting unit with 37816 x 3/4” 1g. cap screw, and flange nut, Note: When using leak mulches, rear riflers must be positioned in top bracket holes (Fig. 93, Figure 8 1. Saar altars 2. Top braces hoes 3.
5. Lower cutting unit, Figure 12 1. Clevis spire in descend holes align spacer and spring with center bracket holes and insert clevis pin through center bracket hole, spacer and spring (Fig. 13}, Secure assemblies with Figure hairpin cotters (Fig, 13}, e I Spacer 2 Clevis pin 3.
