Software Guide

Drill-Rotation-SpeedScreen
Toaccessthisscreen,holdtheOKbuttonontheMain
OperatingScreen(page1).
Thisscreenallowstheusertoincreaseordecreasethe
maximumrotationspeedofthedrill.
Tochangetherotationspeedofthedrill,performthe
following:
1.PressandholdtheOKbutton.
2.PresstheLeftarrowtodecreasethemaximumspeed,
orpresstheRightarrowtoincreasethemaximum
speed(Figure5).
3.ReleasetheOKbuttontosetthedrill-rotationspeed
(Figure5).
Note:Theiconforbutton8isonlyforsoftware
versionsKandup(Figure25).
g029844
Figure5
Drill-rotation-speedScreen
1.Drill-rotationspeedmeter
3.OKbutton(setsthe
drill-rotationspeed)
2.Rightarrow(increase
speed)
4.Leftarrow(decrease
speed)
Horsepower-ControlScreen
Thehorsepowercontrolallowstheusertochangethe
engine-speed(rpm)settingthattheenginecandroopto
beforethehorsepower-controlsystemcanactivate.
Thehorsepowercontrolallowstheoperatortofunctionthe
unitatlowrpmlevels,sothattheenginecanstallunderheavy
loads.
Note:Forexample,atthe50%engine-speed(rpm)setting,
theenginecanstallunderheavyloads.
Afterselectingthehorsepowercontrol(Figure2),selectone
ofthefollowingoptions:
•Pressbuttonnumber1toactivate90%enginespeed
(rpm)asshowninFigure6.
•Pressbuttonnumber2toactivate75%enginespeed
(rpm)asshowninFigure6.
•Pressbuttonnumber3toactivate50%enginespeed
(rpm)asshowninFigure6.
•Pressbuttonnumber4toreturntothemain-operating
screen(Figure6).
Note:Theiconforbutton8isonlyforsoftwareversions
Kandup(Figure25).
g029845
Figure6
Horsepower-controlScreen
1.Returntopreviousscreen
3.75%enginespeed(rpm)
2.50%enginespeed(rpm)4.90%enginespeed(rpm)
3