Installation Instructions

Form No. 3326-614

Seeder Box Kit

Model No. 23120

Installation

Instructions

Dingo



Soil Cultivator

Loose Parts

Note: Use the chart below to identify parts for assembly.

Description Qty. Use

Seeder box

Wheel handle

Nut, M8

Installing the wheel handle

Lever handle

Bolt, small

Installing the lever handle

Mounting bracket, right hand

Mounting bracket, left hand

Bolt, M10 x 35 mm

Locknut, M10

Bolt, M12 x 60 mm

Locknut, M12

Installing the Seeder Box

Installing the Wheel Handle

Insert the stud on the handle through the wheel and secure

in with a nut (M8) (Fig. 1).

m–5363

Figure 1

1. Wheel

2. Handle

3. Nut

Installing the Lever Handle

Install the lever handle to the lever on the front of the

seeder box using the small bolt (Fig. 2).

m–5364

Figure 2

1. Lever

2. Lever handle

3. Small bolt

PAGE 1
Form No. 3326-614 Seeder Box Kit Dingo Soil Cultivator Model No. 23120 Installation Instructions Loose Parts Note: Use the chart below to identify parts for assembly. Description Qty.
PAGE 2
Installing the Mounting Brackets 5 1 1. Loosen the 8 bolts and nuts securing the scraper to the soil cultivator (Fig. 3). Note: There are 4 bolts on each side of the scraper, directly under the scraper adjustment cranks. 1 5 2 2 3 4 3 m–5368 m–5365 Figure 3 (Only the left side of the cultivator is illustrated) 1. Left side, scraper adjustment crank 2. Bolts securing the scraper (2 additional bolts not shown secure the scraper beneath the roller bar) 3. Roller bar 2.
PAGE 3
7. Install the seeder box over the brackets (Fig. 5). Adjusting the Seed Drop Rate 1. Loosen the knob on the front of the adjustment lever assembly on the front of the seeder box (Fig. 6). 3 4 1 2 3 4 1 m–5369 Figure 5 (Only the left side of the seeder box is illustrated) 1. Seeder box mounting pocket 2. Mounting bracket 3. Bolt, M12 x 60 4. Locknut, M12 2 8. Secure the seeder box to the mounting brackets using 2 bolts (M12 x 60) and locknuts (M12) (Fig. 5). 9.
PAGE 4