Installation Instructions

FormNo.3398-315RevA

RollerAssembly

Groundsmaster

4000or4010SeriesRotaryMower

ModelNo.132-6113

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

1.Movethemachinetoalevelsurface,shutoffthe

engine,andengagetheparkingbrake.

2.Removeanddiscardtheexistingfasteners(2boltsand

2nuts)fromthemowerdeckasshowninFigure1.

g033880

Figure1

1.Existingboltsandnuts(nutsshown)

3.Installtherollerbracketontothemowerdeckwith

2carriagebolts(5/16x7/8inch)and2nuts(5/16

inch)fromloosepartsusingtheholesfromwhichyou

removedtheexistingfastenersinstep1(Figure2).

Tightenthefastenersrmly.

g033881

Figure2

1.Nuts(5/16inch)3.Carriagebolts(5/16x7/8

inch)

2.Rollerbracket

4.Installthe2self-tappingboltsthroughtheroller

bracketandintothemowerdeckasshowninFigure3.

Tightentheself-tappingboltsrmly.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3398-315*A

PAGE 1
Form No. 3398-315 Rev A Roller Assembly Groundsmaster® 4000 or 4010 Series Rotary Mower Model No. 132-6113 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation 1. Move the machine to a level surface, shut off the engine, and engage the parking brake. 2.
PAGE 2
g033882 1 Figure 3 1. Self-tapping bolts 5. Align the holes in the roller with the upper set of holes in the roller bracket and insert the roller shaft through the holes (Figure 4). g033884 Figure 5 1 2 g033883 3 4 Figure 4 1. Bolt (3/8 x 1 inch) 3. Roller 2. Roller shaft 4. Nut (3/8 inch) 6. Secure the end of the roller shaft to the roller bracket with a bolt (3/8 x 1 inch) and a nut (3/8 inch) as shown in Figure 4 and Figure 5. Tighten the bolt and nut firmly.