Installation Instructions

FormNo.3452-141RevA

ReverseAlarmKit

ModelNo.131-8549

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Alarm1Installandconnectthealarm.

Nopartsrequired

–

Connectthebattery.

Nopartsrequired

–

Testthealarmfunction.

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrakeorshiftthe

transmissionlevertotheP(PARK)position.

3.Shutoffthemachineandremovethekey.

4.Disconnectthenegativebatterycable;referto

theOperator’sManual.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3452-141*

PAGE 1
Form No. 3452-141 Rev A Reverse Alarm Kit Model No. 131-8549 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 4 Description Use Qty. No parts required – Prepare the machine. Alarm 1 Install and connect the alarm. No parts required – Connect the battery. No parts required – Test the alarm function. 1 Preparing the Machine No Parts Required Procedure 1. Park the machine on a level surface. 2.
PAGE 2
3 Installing and Connecting the Alarm Connecting the Battery No Parts Required Parts needed for this procedure: 1 Procedure Alarm Connect the negative battery cable; refer to the Operator’s Manual. Procedure 1. 4 Unscrew the cap from the alarm. Testing the Alarm Function No Parts Required Procedure 1. g034862 1. Cap 2. Note: Do not start the machine. 2. Alarm Insert the alarm into the provided opening and hand-tighten the cap onto the alarm.