Installation Instructions

FormNo.3448-197RevA

SideViewMirrorKit

Workman

UTXPassengerUtilityVehicle

ModelNo.08140

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.ShiftthetransmissionlevertotheP(Park)position.

3.Shutofftheengineandremovethekey.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3448-197*

PAGE 1
Form No. 3448-197 Rev A Side View Mirror Kit Workman® UTX Passenger Utility Vehicle Model No. 08140 Installation Instructions Installation Preparing the Machine 1. Park the machine on a level surface. 2. Shift the transmission lever to the P (Park) position. 3. Shut off the engine and remove the key. © 2021—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com.
PAGE 2
Installing the Mirror 1. Use 2 screws to secure the mirror to the mirror bracket. 2. Use 2 screws to secure the mirror bracket to the ROPS bracket. 3. Torque each screw to 26 N∙m (228 in-lb). g364544 Figure 1 1. Mirror 2. Screw 3. Mirror bracket 4.