Software Guide

Changingthe
InfoCenterDisplay
Brightness/Contrast
Youcanaccessthebrightnessandcontrastinthe
attachment,autohigh,autolow,andinchmode.
Selectthefarrightbuttontoselecttheicon
brightness/contrasticon.
1.Selectthebrightness/contrasticonfromthe
pop-up-menubar.
2.Usetheplusandminusiconstochangethe
brightness/contrastpop-up-menubar(Figure
20).
g251545
Figure20
1.Decreasebrightness4.Increasecontrast
2.Increasebrightness5.Previousscreen
3.Decreasecontrast
SettingUpParameters
Toaccesstheparameters,rotatetheoperation-mode
selectortotheSposition(Figure21).
g250713
Figure21
UsingtheMachineParameters
Machineparametersareparametersthatcontrol
functionsofthemachineandnotaspecic
attachment.
MaximumAutoHighGroundSpeed
Thisallowsthesupervisortolimitthemachineground
speedwhenthemachineisintheHighAutomotive
mode.Itisadjustablefrom1.6to33.8km/hr(1to21
mph)in0.16km/hr(0.1mph)increments.
MaximumAutoLowGroundSpeed
Thisallowsthesupervisortolimitthemachineground
speedwhenthemachineisintheLowAutomotive
mode.Itisadjustablefrom1.6to12.9km/hr(1to8
mph)in0.16km/hr(0.1mph)increments.
InchMode
Selectenableordisable.
UsingtheAttachmentParameters
Thismachineisuniqueinthateachattachmentisset
upbeforeuseandstoredinthemachinecomputer.
Theattachmentparameterssetthelimitsforeach
attachmentusedwiththismachine.
Note:Ensurethattheparkingbrakeisengaged
whentheoperatorisoutoftheseatwhenusinga
stationaryattachment.
Thefollowingarecharacteristicsofparameters.
•TheparametersareprotectedbyPINsettingsfor
supervisorcontrolwhensecurityisturnedon.
•Theparametersaretheoptionsondifferent
screensandeveryattachmentdoesnotuseall
parameters.
•Theparameterchoicesaredependenton
theselectionofthelocation,powersource,
engagementmethod,andratecontrol.
•Youcansave16differentactiveattachmentsin
themachinecomputer.
Usetheinstructionsonthescreentoguideyou
throughandselectthedifferentparameters.
AttachmentLocation
Thisisthelocationwhereanattachmentisconnected
tothemachine.Thefollowingarethedifferentoptions:
•3-POINT—theattachmentisconnectedthe3-point
hitch
•OTHER—theattachmentisanyattachmentnot
connectedtothe3-pointhitch
AttachmentPowerSource
Thisisthepowersourcetheattachmentuses.The
followingarethedifferentoptions:
•NOPOWER—theattachmentrequiresnoPTOor
hydraulicpower(i.e.theattachmentusesthedraw
barortheloaderjoystick,ifinstalled)
•PTO—theattachmentrequiresPTOpoweronly
10