Operator's Manual

CheckingtheTorqueoftheWheelNuts
ServiceInterval:Aftertherst2hours
Aftertherst10hours
Every200hours
WARNING
Failuretomaintainpropertorqueofthewheelnuts
couldresultinfailureorlossofawheelandmay
resultinpersonalinjury.
Torquethefrontandrearwheelnutsto109to122
N-m(80to90ft-lb)after1to4hoursofoperation
andagainafter10hoursofoperation.Torquethe
wheelnutsevery200hoursthereafter.
CheckingtheFrontWheelAlignment
ServiceInterval:Every400hours/Yearly(whichevercomes
rst)
1.Makesurethatthetiresarefacingstraightahead.
2.Measurethecenter-to-centerdistance(ataxleheight)at
thefrontandrearofthesteeringtires(Figure65).
Note:Themeasurementmustbewithin0±3mm
(0±0.12inch)atthefrontofthetirethenattherear
ofthetire.
Important:Checkthemeasurementsatconsistent
locationsonthetire.Thevehicleshouldbeona
atsurfacewiththetiresfacingstraightahead.
Figure65
1.Frontofvehicle3.Centertocenterdistance
2.0±3mm(0±0.12inch)
fronttorearoftire
3.Rotatethetire90degreesandcheckthemeasurements
again.
Note:Themeasurementmustbewithin0±3mm
(0±0.12inch)atthefrontofthetirethenattherear
ofthetire.
4.Adjustthecenter-to-centerdistanceasfollows:
A.Loosenthejamnutatthecenterofthetierod
(Figure66).
Figure66
1.Tierods2.Jamnuts
B.Rotatethetierodtomovethefrontofthetire
inwardoroutwardtoachievethecentertocenter
distancesfromfronttoback.
C.Tightenthetierodjamnutwhentheadjustment
iscorrect.
D.Checktoensurethatthetiresturnanequal
amounttotherightandtotheleft.
Note:Ifthetiresdonotturnequally,referto
theWorkmanServiceManualfortheadjustment
procedure.
46