Installation Instructions

FormNo.3411-999RevA

BucketSeatBaseKit

Workman

GTXSeriesUtilityVehicles

ModelNo.07048

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Seatassembly

1Installthebucketseat.

Important:YoumustinstalltheSeatHingeKitbeforeinstallingtheBucketSeatBaseKit.

PreparingtheMachine

1.Parkthemachineonalevelsurface.

2.Engagetheparkingbrake.

3.Shutofftheengineandremovethekeyfromthekeyswitch.

g038447

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3411-999*A

PAGE 1
Form No. 3411-999 Rev A Bucket Seat Base Kit Workman® GTX Series Utility Vehicles Model No. 07048 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. Seat assembly 1 Install the bucket seat.
PAGE 2
Installing the Bucket Seat Slide the seat assembly onto the pins and lower the seat assembly (Figure 2). g190186 Figure 2 1.