Installation Instructions

5.Looselyinstallthefendertothetopofthe
footboardusingatorx-headscrew(1/4x1-1/4
inches),ahex-angenut(1/4inch),andaat
washer(5/16inch)asshowninFigure53.
g198839
Figure53
WheelHiddenforClarity
1.Torx-headscrew(1/4x
1-1/4inches)
3.Fender
2.Footboard
4.Hex-angenut(1/4inch)
6.Repeatthisprocedurefortheotherfender.
7.Tightenallofthehardware.
14
RoutingandConnecting
theChokeCable(Gasoline
MachinesOnly)
Partsneededforthisprocedure:
1
Cabletie
Procedure
1.Routethechokecablefromthefrontofthe
machine,underthesteeringrack,throughthe
framechannel,totheengine,andsecureit
usingacabletie(Figure54).
g193194
Figure54
SomePartsHiddenforClarity
1.Cabletie2.Chokecable
2.Connectthechokecabletotheengine(Figure
55).
3.Adjustthechokecableasfollows:
A.PlacethechokecontrolintotheOFF
position.
B.Positionthebendontheendofthethrottle
cableintothechokeassembly(Figure55).
Note:Ensurethatthechokeplateisinthe
fully-openpositionwhenyousecurethe
chockcable.
g036767
Figure55
1.Cablebend2.Cableclamp
C.Usethecableclamptosecurethechoke
cableintoposition(Figure55).
23