Installation Instructions

10.Installconvertermoduletothedash
reinforcementusing2screws(#10x1/2inch)
and2angenuts(#10)asshowninFigure40.
Important:Thisstepappliestoelectric
machinesonly.
g227497
Figure40
1.Flangenut(#10)3.Dashreinforcement
2.Convertermodule4.Screw(#10x1/2inch)
11.Installthehornassemblytothedash
reinforcement(Figure44andFigure48).
12.Asyouinstallthedash,routethechokecable
underneaththefootboard-to-dashbracketand
overtheshiftcable(Figure41).
g193164
Figure41
1.Footboard-to-dashbracket
3.Chokecable
2.Shiftcable
13.Setthedashovertheparking-brakelever.
14.Securethedashusing10torx-headscrews(1/4
x1-1/4inches)asshowninFigure42.
Important:Installthescrewsfromthe
centerout,leavingthescrewslooseuntilall
10areinstalled.Tightenthescrewsfromthe
centerout.
g227500
Figure42
1.Torx-headscrew(1/4x
1-1/4inches)
2.Dash
15.Adjustthedashreinforcementuntilitisush
withthefrontedgeofthedashbyperforming
thefollowing:
A.Liftthedashreinforcementupwarduntilit
makesrmcontactwiththedash.
B.Secureitinplacebytighteningthe2screws
looselyinstalledatthebeginningofthis
procedure.
C.Tightentheouterdashbrackethardware.
16.Tightenallthehardware.
16