Installation Instructions

Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
Hose-reelmount1
Tubemount1
Hex-headscrew(1/2x2-1/4inches)
1
Locknut(1/2inch)
1
Clevispin(1/2x2inches)
1
2
Hairpincotter1
Installthehose-reelmount.
Thehose-reelmountisdesignedtotaftermarkethosereelswithmountingpatternsofeither40x23cm(15-3/4x9
inches)or39x25cm(15-7/16x10inches).
Tororecommendsthefollowingaftermarkethosereels:
•Reelcraft—CA33112L
•Cox—1125-5-100
Important:Thetotalloadcapacitywhenthiskitisinstalledis45kg(100lb).Wheninstallingthehosereel,verify
thatthehoselength,whenfullofwater,doesnotexceed45kg(100lb),ordamagemayoccur.
Important:Afterinstallingthehose-reelmounttothemachine,thelengthofthefrontorrearofthemachine
extends,makingitmorelikelytohitotherobjects.
Ensurethatthereisalwaysadequateclearancewhenoperatingthemachinewiththehose-reelmountinstalled.
WARNING
Liftingthehose-reelmountwiththehosereelinstalledalonemayresultininjury.
Whenliftingthehose-reelmountwiththehosereelinstalled,ensurethatyouhave2peopletoinstallit
tothemachine.
1
PreparingtheMachine
NoPartsRequired
Procedure
Parkthemachineonalevelsurface,settheparkingbrake,shutofftheengine,andremovethekey.
2